This Hydroelectric lift works with 3 Phase (1 kw) power pack which consumes Electric power for lifting time only. It does not require Compressed Air so it does not disturb your Pneumatic working system. It is very economically designed and hence suits every Dealer. Its look is very aesthetic as such makes your work place beautiful. It works very smoothly and trouble free. One power can be used with 2/3/4 lifts as per the option you purchased.
Specifications :
Type | Hydro Electric – Scissor type |
---|---|
Frame | Mild steel (Rectangular) tube L x W = 1950 x 555 mm |
Top Frame | Mild Steel Rectangular Tubular L x W = 1950 x 555mm |
Min. Closing Height | 110 mm (it is our specialty) |
Max. Opening Height | 740 mm |
Paint | Paint Powder Coating, Muncil Grey |
Top | SS sheet or M.S sheet Power Three phase electric supply (single phase optional) |
Power | Three phase electric supply (single phase optional) |
Operation | Wall switch of solenoid valve for up and down |
Power Pack | Hydro-electric 1 HP, 3 Phase motor, solenoid Control Power Pack. For 2 Lift, 3 Lift or 4 Lift |
Safety Locking | Mechanical locking |
Operation | Wall switch of solenoid valve for up and down |
Lifting Capacity | One Bike (Approx 200 Kg) |
Installation | Flushed into Trench or on floor |
Non Trench installation | Extra Ramps are available |
Dimensions | 1950 x 555 x 110 (mm) |
Downing Speed | Variable |
Note: For further development, the specifications can be changed at any time without any prior notice.