This lift works on Power Pack which is individually in-built and consumes only 500 watts electricity for lifting the vehicle. It does not require compressed air so does not disturb pneumatic working system. It is very economically designed and is very simple in installation and operation. Hence it suits every dealer. No help of a mechanic is required to install it. It is also operated by foot paddle and it is a composite lift which works with electric power and as also by foot paddle if there is no power supply.
Specifications :
| Type | Hydroelectric cum Foot paddle – Scissor Type |
|---|---|
| Frame | Mild steel Square tube L x W = 1950 x 555mm |
| Top Frame | Mild Steel Rectangular Tubular L x W = 1950 x 555mm |
| Min. Closing Height | 230mm |
| Max. Opening Height | 740mm |
| Paint | Powder Coating, Muncil Grey |
| Top | SS sheet or Ms sheet |
| Power Supply | Single phase 220-volt, 10 Amp. |
| Operation | Inbuilt power pack operated with a foot electric switch near motor for Up and Rotary valve for downing and manual Foot paddle pump operated also. |
| Safety Locking | Mechanical locking |
| Lifting Capacity | One Bike (approx 200 kg) |
| Installation | Flushed into Trench or on floor. |
| Ramp | Inbuilt sliding ramp provided |
Note: For further development, the specifications can be changed at any time without any prior notice.